Go to the home page
0 €0.00*

Galvanised cast steel pipe connectors 48.3 mm (1½")

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.
Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.
Short T-piece, combined dimensions: horizontal 42.4 mm (1¼") – vertical 48.3 mm (1½")
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002DE

€7.21*
Silver-coloured T-pipe connector, connects two blue pipes at a 90-degree angle: one pipe runs horizontally through the top of the connector, the second runs vertically downwards from the centre. Two Allen screws at the front for securing.
Short T-piece 48.3 mm (1½”)
For creating a vertical connection between two pipes. Upper pipe connector for straight and horizontal railing posts. This pipe connector cannot be used to connect a horizontal pipe within the pipe connector.
Product number 608002E

€6.70*
Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.
Short T-piece, combination dimensions: horizontal 48.3 mm (1½”) – vertical 42.4 mm (1¼”)
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002ED

€6.70*
Silver-grey T-piece connects two blue pipes: horizontally at the top, vertically downwards at the bottom. Adjustable angle, secured by two visible Allen screws. Surface of the cast piece is slightly textured.
T-piece, short, variable angle 0°–11°, 48.3 mm (1½”)
Same pipe connector as Type 2, but with a variable angle of 0°–11°.
Product number 608002SE

€9.03*
A short, silver metal T-piece with a rough surface, connecting two blue pipes at a 45-degree angle. The two pipes are each secured to the fitting by a hexagon head screw, with one running vertically and the other diagonally.
T-piece, short 45° 48.3 mm (1½”)
Creates a connection between two pipes at a 45° angle.
Product number 608003E

€10.98*
Silver-coloured T-pipe connector joins three blue pipes. Two run horizontally and one vertically downwards, creating a sturdy T-connection. Each connection is secured with an Allen screw.
T-piece, long 48.3 mm (1½”)
Similar to Type 02. This pipe connector can be used when a connection point is required in a horizontal pipe.
Product number 608004E

€11.75*
Grey T-piece pipe connector joins three blue pipes: two horizontally (the right-hand one angled slightly downwards) and one vertically in the centre. Three hex socket screws secure the pipes. Angle 0 to 11 degrees.
T-piece, long. Variable angle 0°–11° 48.3 mm (1½”)
Same pipe connector as Type 4, but with a variable angle of 0°–11°.
Product number 608004SE

€17.78*
Galvanised T-piece, permanently mounted on a blue tube, with an open round socket facing left and a side-mounted Allen screw for securing. Surface of the swivel tube connector is rough, with a matt finish. Insert for flexible tube constructions.
Internal rotating T-piece 48.3 mm (1½”)
Insert for use in the sockets of other pipe connectors, suitable for the construction of adjustable stair railings, brackets and similar applications.
Product number 608005E

€9.52*
Sturdy, silver-coloured elbow connector joins two blue tubes (60.3 mm/2 inches) at a 90° angle. Visible matt, rough cast surface; one Allen screw each for secure fastening to railings.
90° elbow 48.3 mm (1½”)
Elbow connector for use as an end pipe connector for the upper railing element.
Product number 608006E

€8.67*
Sturdy, silver-grey 90-degree elbow pipe connector, connecting two blue pipes: one horizontally to the left, the other vertically downwards. Two hex socket screws visible for securing. Slightly textured surface.
90° elbow, variable angle 0°–11°, 48.3 mm (1½”)
Same pipe connector as Type 6, but with a variable angle of 0°–11°.
Product number 608006SE

€10.98*
Sturdy, silver-coloured angle connector with a rough cast finish, connecting two blue tubes: one pointing vertically upwards, the other diagonally downwards to the right. Adjustable angle, two Allen screws for fixing.
T-piece, short. Adjustable 30°–60° 48.3 mm (1½”)
This adjustable angle connector is used to join tubes at angles between 45° and 60°. Suitable for diagonal connections, struts and an angled handrail connection to vertical posts on staircases.
Product number 608007E

€12.00*
A cylindrical, silver-grey metal extension piece with a rough, galvanised surface connects two vertical blue tubes. The fitting encircles them and is secured at the top and bottom with two hexagon bolts on each side.
Extension piece, external diameter 48.3 mm (1½”)
Connecting clamp for pipes of the same diameter. Not suitable for heavy vertical loads.
Product number 608008E

€7.21*
A silver-grey, rough-textured tube connector with a visible hexagon socket screw, clamped tightly around a smooth, matt blue tube. It serves as a flush extension of two identical tubes for secure fastening.
Extension piece, internal 48.3 mm (1½”)
A streamlined, flush connection between two tubes of the same size. The wall thickness must be 3.2 mm. Do not apply direct load to this connection.
Product number 608009E

€7.54*
Round base plate made of galvanised metal, which encloses a blue tube at the top. An Allen screw secures the tube in the connector. The plate is silver-grey with a rough metallic texture. For fixing the position.
Base plate, round 48.3 mm (1½”)
This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.
Product number 608010E

€10.55*
A square base plate made of silver, textured metal, which holds a blue tube vertically. A hexagon bolt secures the tube at the side within the through-type connector. Two round holes on the base are provided for fixing.
Base plate, square, full-length 48.3 mm (1½”)
This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.
Product number 608011E

€9.73*
Sturdy oval base plate made of grey metal supports a blue vertical post. With two visible fixing holes. Cylindrical tube connector reinforced with wide ribs, secures the post with two hexagon socket screws.
Base plate, oval 48.3 mm (1½”)
Strong base plate for supporting vertical posts. Vertical wide ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should be appropriate for the load applied.
Product number 608012E

€14.39*
A grey, metallic ceiling bracket for railings, shown at an angle from the side, with a blue tube inserted. This robust component features two Allen screws for secure fastening and is designed for angles between 11 and 29 degrees.
Base plate, oval, variable angle 0°–11°, 48.3 mm (1½”)
The same pipe connector as Type 12, but with a variable angle of 0°–11°.
Product number 608012SE

€17.97*
Grey, galvanised wall bracket for vertical posts. L-shaped fitting with a cylindrical opening, containing a blue tube. Two Allen screws for fixing. Mounting plate with two holes for walls, parapets or steps, ideal for safety railings.
Horizontal wall bracket 48.3 mm (1½”)
Side-mount clamp for vertical posts. The tube does not fit through this clamp. Designed for manual fixing of safety railings and balustrades to walls, parapets, steps and ramps.
Product number 608013E

€20.81*
Sturdy grey metal wall bracket for vertical posts. Side-mount clamp with a cylindrical opening for a blue tube, flat mounting plate with three screw holes. Two hex socket screws secure the post. Rough metal.
Vertical wall bracket 48.3 mm (1½”)
Side-mount clamp for vertical posts. The tube does not fit through this clamp. Designed for manual fixing of safety railings and balustrades to walls, parapets, steps and ramps.
Product number 608014E

€20.95*
Galvanised three-way corner joint connects three blue tubes at a 90-degree angle: two horizontally, one vertically downwards. Sturdy corner clamp with visible Allen screws for a stable construction, ideal for railing corner joints.
Three-way corner piece 90° 48.3 mm (1½”)
Corner connector (90°) for upper railing corner pieces and all other rectangular systems.
Product number 608018E

€12.18*
Grey metal corner joint, connecting four blue tubes at a 90-degree angle. One tube runs vertically through the centre, with three others attached horizontally at the sides. Black fixing screws are visible at the top.
90° corner joint, straight-through, 48.3 mm (1½”)
Used as a counterpart to Type 18; the pipe fits through the connector.
Product number 608020E

€10.08*
A grey, hinged metal angle clamp connects three blue tubes at a 90-degree angle. One vertical tube runs through the central opening, whilst two horizontal tubes are inserted at the sides and secured with hexagon socket screws.
Hinged 90° elbow joint 48.3 mm (1½”)
Hinged 90° elbow joint, with the vertical pipe running through the clamp.
Product number 608020OE

€17.78*
Sturdy, silver-coloured metal cross-piece for a 90° connection of four blue tubes. The connecting clamp guides the tubes horizontally and vertically, with three visible hexagon socket screws for secure fastening. Ideal for railings.
Cross piece, solid 48.3 mm (1½”)
90° connecting clamp between the central element and the post on railings.
Product number 608022E

€10.16*
A grey, open cross-piece connects two blue pipes at a right angle. The metal element encloses the vertical pipe and secures a horizontal pipe with two visible Allen screws. A hinge indicates that it can be folded open for assembly.
Open (hinged) cross-piece, 48.3 mm (1½") on one side
Fold-out elbow joint (90°), with the vertical pipe running through the clamp.
Product number 608022OE

€17.78*
Silver cross connector from Swissclamp, connects two blue tubes at an angle. Slightly rough metal surface, three hex socket screws. Tubes cross at an angle, ideal for railings with a slope of 11 to 29 degrees.
Cross piece in 1 plane for gradients of 0°–11° 48.3 mm (1½”)
Adjustable connecting clamp between the centre rail and the rail posts for angles of between 0° and 11°.
Product number 608022SE

€13.57*
Sturdy silver-grey metal clamp acting as a cross-piece connects two blue tubes at an angle: one vertically, the other diagonally. Secured with three Allen screws. Adjustable angle connection for handrails with a slope of 30° to 45°.
Cross piece for slopes of 30°–45°, 48.3 mm (1½”)
Variable angle clamp for custom angles between 30° and 45°. Type 7 can be used for the upper handrail.
Product number 608023E

€18.37*
A galvanised 3-way T-shaped connector joins three blue horizontal tubes at a 90-degree angle. A fourth blue tube runs vertically through the centre. All tubes are secured with hexagonal bolts on the sides.
T-piece for support tube 48.3 mm (1½”)
3-way connector for fixing supports with 3 horizontal tubes arranged vertically to one another. The support tube fits through the connector.
Product number 608024E

€12.37*
Galvanised, open T-piece as a hinged pipe connector with a side outlet. It connects four blue pipes: one vertically, two horizontally through the top and a fourth at the side. Visible locking screws secure the pipes.
Open (hinged) T-piece with side outlet 48.3 mm (1½”)
The same pipe connector as Type 24. However, this pipe connector can be attached to an existing structure using a hinged section on the vertical pipe connector.
Product number 608024OE

€23.14*
Silver, galvanised cross piece as a 4-way connector for tubes. Connects four blue, horizontal support tubes at right angles and a fifth blue tube vertically through the centre. Each connection secured with an Allen screw.
Cross piece for 48.3 mm (1½”) support tube
4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector.
Product number 608026E

€20.07*
A grey, hinged four-way metal cross-piece connects four horizontal blue tubes to a vertical blue tube. The clamp has several screws and serves as a connecting element for scaffolding or shelving.
Open (foldable) four-way cross-piece 48.3 mm (1½”)
Hinged 4-way clamp for connecting vertical rails to 4 horizontal tubes positioned at right angles to one another. The vertical tubes run through the clamp.
Product number 608026OE

€28.51*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross piece, combination sizes 48.3 mm (1½”) – 42.4 mm (1¼”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028ED

€7.69*
Sturdy, silver-coloured pipe connector made of galvanised steel, connecting a vertical pipe to an angled blue pipe. With three visible hexagon socket screws for fixing handrails/railings with an inclination of up to 45°.
Handrail mounting up to 45° 48.3 mm (1½”)
Pipe connector for railings with an angle of inclination up to 45°
Product number 608027E

€16.29*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross-piece, combination size 48.3 mm (1½”) – 33.7 mm (1”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028EC

€6.60*
A galvanised cross piece connects two blue tubes at a 90-degree angle. The tube connector is foldable and is secured with Allen screws. It forms a stable junction for tube structures, ideal for existing structures.
90° open (foldable) cross piece 48.3 mm (1½”)
The same pipe connector as Type 28. However, this pipe connector can be attached to an existing structure using a folding section.
Product number 608028OE

€12.02*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
Cross-piece, offset, 90° 48.3 mm (1½”)
The cross-connection clamp (90°) is used for long pipe intersections with supports, reducing cutting costs and increasing the strength of the system whilst maintaining the continuity of the pipe used.
Product number 608028E

€6.76*
Sturdy, silver-coloured metal connector (cross T-piece) that holds four blue cylindrical tubes in a cross shape: two horizontally, two vertically. Connections secured with visible Allen screws, ideal for truss structures.
Cross T-piece, combined 48.3 mm (1½”)
Frequently used for truss structures. The opening in the support can be adjusted to suit the intended application. For shelving trusses, the outer opening is in the support, whilst for pallet racks, the support is located inside the load-bearing elements.
Product number 608030E

€12.45*
Foldable T-joint made of galvanised steel connects two blue pipes at a 90-degree angle: one horizontally, one vertically downwards. Sturdy connector with visible hinges and Allen screws for secure fastening.
T-piece, open (hinged) 48.3 mm (1½”)
Creates a vertical connection between two tubes. Used for extending and adapting existing structures.
Product number 608031OE

€12.02*
Silver-coloured, open metal T-piece, connecting one blue tube horizontally and one vertically. Sturdy T-clamp (open T-piece) for 60.3 mm (2 inches) with a hexagon head screw at the top and an Allen screw at the bottom. Matt, slightly rough surface.
T-piece, open 48.3 mm (1½”)
For the extension and modification of existing structures.
Product number 608032E

€6.99*
Grey cross-piece connects two blue pipes at a 90° angle; open clamp with screw for the stable extension of pipe structures.
Cross-piece, open. 90° 48.3 mm (1½”)
Cross-connection clamp as an addition to an existing structure.
Product number 608033E

€7.91*
Grey, metallic handrail bracket with a round clamp that holds a blue tube horizontally. Flat base plate with a screw hole for wall mounting and a sturdy crossbar. An Allen screw secures the tube in the clamp.
Handrail bracket 48.3 mm (1½”)
Handrail bracket. For fixing handrails and structures to the wall.
Product number 608034E

€6.05*
Open, galvanised handrail bracket for permanent wall mounting of a blue handrail tube. Solid bracket with a rectangular base plate, two visible fixing holes and a U-shaped element that secures the tube using an Allen screw.
Handrail bracket, open 48.3 mm (1½”)
For fixing handrails and structures to the wall.
Product number 608035E

€14.84*
A silver, metallic swivel eye is securely mounted on a blue vertical tube. The connector features a hexagon socket screw for secure mounting and an arm with a round opening for plates or to act as a swivel.
48.3 mm (1½") swivel eye
For use with Type 42 articulated tube connectors, as well as for fixing panels and boards.
Product number 608036E

€5.36*
A silver, double metal joint is clamped around a vertical blue pipe. It has two round eyelets opposite each other in a horizontal line and is secured with an Allen screw.
Double swivel eye, 48.3 mm (1½”)
Similar to Type 36, with two eyes on the same axis (180°).
Product number 608038E

€5.01*
A silver-coloured, double metal swivel eye clamps onto a vertical blue tube. Two eyelets offset by 90 degrees: one with a side-mounted locking screw, the other with a round through-hole.
Double swivel eye, 90°, 48.3 mm (1½”)
Similar to Type 36, with two eyelets arranged at right angles to each other (90°).
Product number 608040E

€7.23*
Detailed view of a galvanised steel joint bracket holding a blue pipe. An Allen screw secures the pipe. Below this is a forked fitting with a round hole for mounting a movable joint.
Articulated bracket 48.3 mm (1½”), 1 M10x40 screw
A component of the articulated pipe connector, which is generally not used on its own, but in combination with, for example, Type 36.
Product number 608042E

€6.48*
A silver, sturdy joint connects two blue tubes at an adjustable angle. It consists of two parts with an axle, each of which clamps a tube in place using an Allen screw. One tube runs vertically, the other horizontally to the left.
Articulated joint 48.3 mm (1½”), consisting of 1 x 608036E and 1 x 608042E
consisting of 1 x 608036E and 1 x 608042E Articulated pipe connector for adjustable angle mounting.
Product number 608044E

€10.55*
A double silver metal joint connects a central blue post to two blue tubes sloping downwards. These are fixed at an adjustable angle using hex socket screws and can be mounted flexibly.
Double joint, 48.3 mm (1½”), comprising 1 x 608038E and 2 x 608042E, incl. 2 M10x40 screws
Consisting of 1 x 608038E and 2 x 608042E Articulated pipe connector for adjustable angle mounting on both sides of the post.
Product number 608046E

€17.60*
A double joint made of grey metal connects three blue tubes. One vertical tube runs through the central clamp, whilst two others are attached at the sides via movable joints: one horizontally, one sloping downwards.
Double joint, 90°, 48.3 mm (1½”), comprising 1 x 608040E and 2 x 608042E, incl. 2 M10x40 bolts
consisting of 1 x 608040E and 2 x 608042E Articulated pipe connector for the adjustable angle mounting of corner posts.
Product number 608048E

€19.76*
Adjustable angle joint consisting of two connected parts: at the front, a silver-grey connector for a horizontal and a vertical blue tube; at the rear, a white extension. All tubes are secured with Allen screws, allowing for flexible angle adjustment.
Angle joint, adjustable 1 pair = 2 pieces 48.3 mm (1½”)
ALWAYS 2 PARTS MAKE ONE CONNECTOR! ENTER DOUBLE THE QUANTITY
Product number 608049E

€7.48*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

€4.52*
A grey articulated base enclosing a blue rod, positioned diagonally on a white background. It consists of a cylindrical holder and a flat, rectangular mounting plate with two drill holes, connected by a hinge.
Articulated base 48.3 mm (1½”), comprising 1 x 608050 and 1 x 608042E, incl. 1 M10x35 screw
consisting of 1 x 608050 and 1 x 608042EUsed for angled wall mounting or as a support for a support post.
Product number 608051E

€10.28*
Grey, galvanised pipe connector with a triangular wall flange. Three drill holes for mounting and two Allen screws for securely fixing a vertical blue pipe. For posts Ø 48.3 mm.
Wall bracket, triangular flange 48.3 mm (1½”)
Side-mounted pipe connector for vertical posts. The support does not fit through the pipe connector.
Product number 608053E

€19.13*
Grey, cylindrical cast iron street base with a round top plate. Blue post in the base. Ground sleeve pipe connector with side brackets for concrete anchoring and an opening for an adjusting screw to secure the 48.3 mm post tube.
Street base 48.3 mm (1½”)
A ground sleeve pipe connector in concrete for securing the support pipe. This allows posts to be inserted and held in place with a locking set screw.
Product number 608054E

€46.82*
A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab 48.3 mm (1½”)
Pipe connector for panel mounting.
Product number 608055E

€5.05*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab 48.3 mm (1½”)
Panel mounting tube connector with two eyelets; also used for locking gates.
Product number 608056E

€7.83*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring 48.3 mm (1½”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060E

€2.35*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook 48.3 mm (1½”)
Pipe connector for chain fastenings.
Product number 608061E

€4.25*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring diameter, 48.3 mm (1½”)
Internal hinge pipe connector, for Type 63.
Product number 608062E

€3.70*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustable ring pin, 48.3 mm (1½”)
External hinge pipe connector, for use in combination with Type 62
Product number 608063E

€4.84*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 48.3 mm (1½”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064E

€4.25*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 48.3 mm (1½”)
Single-sided wire mesh clamp
Product number 608070E

€2.15*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double, 48.3 mm (1½”)
Double-sided wire mesh clamp
Product number 608071E

€2.51*
Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.
Eaves bend 48.3 mm (1½”)
This pipe connector is required for roof structures, usually in combination with Type 91E.
Product number 608085E

€19.13*
Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.
Eaves cap 48.3 mm (1½”)
This pipe connector is required for roof structures, usually in combination with Type 85E.
Product number 608091E

€15.23*
Silver metal elbow connector, connects two blue tubes at a variable angle (approx. 45°). Smooth, robust, slightly textured. Allen screws at both ends for securing the tubes. Often used as an end stop for handrails/railings.
Elbow 40°–70° variable. 48.3 mm (1½”)
Elbow connector as an end stop for the upper railing with a variable angle of 40° to 70°. Most commonly used for stair railings.
Product number 608123E

€18.05*
Sturdy, silver-coloured elbow connector made of galvanised metal, connects two blue tubes at a variable angle. Two hexagon head screws at the top for securing. Ideal for handrails/vertical supports, 42.4 mm (1¼”) tube.
Curve 15°–60° variable 48.3 mm (1½”)
Elbow 15° - 60° variable. Elbow connector as an end stop for the top rail with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124E

€10.55*
Silver-grey, adjustable metal elbow connector, connects two blue tubes at an adjustable angle. Sturdy elbow with pivot point and fixing screws. Adjustable from 75° to 210°, for 33.7 mm (1”) tubes.
Elbow, adjustable. Variable elbow connector. 48.3 mm (1½”)
This connector can be used as a corner with angles ranging from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125E

€15.61*
A silver metal crosspiece connects two blue pipes; one runs vertically, the other diagonally at a 45-degree angle. The clamp is secured with screws that hold the pipes firmly in place and allow for a slope.
Cross piece for 45° slope, 48.3 mm (1½”)
Connecting clamp between the central rail and the rail posts for sloping rails with a fixed angle of up to 45°
Product number 608126E

€17.52*
Galvanised, extra-heavy-duty wall bracket for pipes with a blue, vertical post. Two hex socket screws secure the pipe in the cylindrical clamp. Flat brackets with round holes for fixing.
Horizontal wall bracket, extra heavy-duty 48.3 mm (1½”)
Horizontal wall bracket, extra heavy-duty. Extra heavy-duty pipe connection corner bracket for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with flat mounting.
Product number 608146E

€19.85*
Extra-heavy, galvanised step edge footplate for fixing with a blue, vertical tube in the central clamping area. Rectangular base with 2 fixing holes, side flanges each with 2 slotted holes. Tube with 2 hex socket screws.
Trittrand base plate 48.3 mm (1½”)
Extra-heavy base plate for fixing to a step. Most commonly used on roofs.
Product number 608147E

€28.92*
An open cross-piece made of grey metal connects two blue pipes. The upper pipe runs diagonally through the upper opening, whilst the lower pipe lies horizontally beneath it and is held in place by the lower clamp. A clamping screw is visible.
Open cross piece with insert 48.3 mm (1½”)
Open cross piece in which the crossbar is inserted into the insert and then tightened.
Product number 608201E

€14.69*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross-piece, combination size 60.3 mm (2”) – 48.3 mm (1½”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028FE

€10.59*
A short silver metal T-piece connects a horizontal pipe to a vertical pipe. Both blue pipes are secured with grub screws. The horizontal pipe is thicker than the vertical one (unequal diameters). Rough surface: galvanised steel.
Short T-piece, combined dimensions: horizontal 60.3 mm (2”) – vertical 48.3 mm (6/4”)
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002FE

€10.14*
Grey container clamp for 48.3 mm pipes with two vertically stacked round openings and hexagon socket screws. With flat mounting plate and fixing holes for frame mounting on the front of containers.
Container clamp 48.3 mm (1½”)
For connecting the front ends of multiple containers Pipe connector for securing frames or structures to the front of the container, for mounting a large frame onto several containers.Suitable only for standard 20-foot shipping containers.
Product number 6080C3428

€23.14*
Polished stainless steel adjusting screw, shown from three angles. Cylindrical, with external thread and deep hex socket. 1/4-inch screw for pipe connectors, shown in side and top views.
Stainless steel adjusting screws for pipe connectors. 3/8” (for D / E / F)
Product number 608076DEF

€2.31*
Black, L-shaped Allen key shown diagonally on a white background. Two arms: short arm pointing up and to the left, long arm pointing down and to the right. Hexagonal tips. For fitting pipe connectors.
Allen keys for pipe connectors for D / E / F
All you need to install our pipe connectors is a standard Allen key. Available in various inch sizes: D: 1 1/4" (42.4 mm) Size E: 1 1/2" (48.3 mm) Size F: 2" (60.3 mm)
Product number 608075DEF

€1.33*
A transparent plastic bag filled with lots of grey plastic screw caps. Each cap has a flat, round top and a cylindrical insert. The grey caps are evenly distributed.
Plastic screw cap grey
(25 pieces per bag) For D / E / F
Product number 608078DEF

€9.26*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plug, black plastic, 48.3 mm (1½”)
Plastic cap for sealing the pipe end.
Product number 608074E

€1.64*
Sturdy grey metal container clamp with a 48.3 mm (1½ inch) cylindrical opening at the top and an Allen screw for securing pipes. Flat mounting base with two pre-drilled holes for secure attachment to shipping containers.
Container clamp 48.3 mm (1½”)
For container roofPipe connector for securing frames or structures to the container roof. Suitable only for standard 20-foot shipping containers.
Product number 6080C3449

€17.43*
Metal plug with a round, flat front and a square shaft tapering towards the rear. Grey surface with a slightly rough texture. For sealing a thick-walled pipe, suitable for Ø 33.7 mm (1 inch).
Plug, metal 48.3 mm (1½”)
Aluminium cap for sealing the pipe end. Only suitable for thick-walled pipes.
Product number 608073E

€4.23*
A round, grey plastic plug with a smooth, flat surface and four circumferential ribs on the side, which ensure a secure fit in a pipe with a diameter of 60.3 mm. The plug is from the brand Lunado.
Plug, grey plastic, 48.3 mm (1½")
Product number 6080G74E

€1.64*
Grey, metal container clamp with a cylindrical pipe opening (48.3 mm) and a visible hexagon bolt for securing. Horizontal mounting plate with two screw holes on the central upright for attachment to shipping containers.
Container clamp 48.3 mm (1½”)
For the front of the containerPipe connector for securing frames or structures to the front of the container. Suitable only for standard 20-foot shipping containers.
Product number 6080C3400

€18.09*
Detailed view of a robust, galvanised eyelet fitting with a double tab at a 90-degree angle. Features a round pipe clamp for a 48.3 mm diameter and a side clamping screw. Complete with a flat mounting plate with a hole.
Eyelet fitting with double flange 90°, 48.3 mm (1 1/2")
Product number 608057E

€8.44*
Sturdy, grey 90-degree metal elbow connector. Connects two blue tubes at a right angle. Two visible hex socket screws secure the tubes firmly in place. The slightly textured surface has an industrial, robust look.
90° elbow – combination size 48.3 (1 1/2") – 42.4 (1 1/4") mm
Product number 608006ED

€8.46*
Grey, galvanised, hinged metal T-piece, slightly angled to the right, with a 45° opening. Two hex socket screws (bent at the side and top) for fixing to the pipe. Slightly textured surface. For 48.3 mm pipes.
Hinged T-piece, short 45° - 48.3 mm (1 1/2")
Product number 608003OE

€22.30*
Sturdy, silver-coloured metal cross-piece for a 90° connection of four blue tubes. The connecting clamp guides the tubes horizontally and vertically, with three visible hexagon socket screws for secure fastening. Ideal for railings.
Through-type cross-piece – mixed sizes: handrail 42.4 mm – upright 48.3 mm
Through-type cross-piece – mixed sizes: handrail 42.4 mm – upright 48.3 mm
Product number 608022DE

€10.02*
Certified specialist retailer

Certified specialist retailer

Here you benefit from expert advice, solutions tailored to your needs and genuine specialist expertise. Reliable after-sales service is guaranteed!
Your Tuboconex team of experts

Secure payment

Secure payment

You can pay by credit card, Apple Pay, Bancontact, Trustly and Bizum. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & construction planners

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this is a guarantee of quality, expertise and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...